Scotch-Brite Clean and Strip XT Pro Extra Cut Disc features aluminium oxide abrasive mineral incorporated into an open nylon web. It is designed to remove heavy rust, thick paint and corrosion while also scratching the base material underneath, which can save you time. The highly conformable, high-strength fibres resist chunking and loading, and they perform well on edges.
Take Advantage of High Conformability
With its reengineered fibre web, the Scotch-Brite Clean and Strip XT Pro Extra Cut Disc allows operators to take advantage of all the benefits that come with increased conformability without compromising strength. With increased conformability, this disc achieves a larger contact area with the workpiece for faster removal rates. It also conforms to weld bead ripples to polish welds without removing them, and works in hard-to-reach areas without damaging the substrate.
In addition to its high conformability, the Scotch-Brite Clean and Strip XT Pro Extra Cut Disc offers low vibration, decreased chunking, a high speed rating and long life. That all adds up to a disc you can spin onto your angle grinder with confidence.
Save Time with Aluminium Oxide
We designed our Scotch-Brite Clean and Strip XT Pro Extra Cut Disc with aluminium oxide abrasive mineral because of its ability to remove heavy coatings and simultaneously scratch and clean to the bare metal underneath without leaving divots. This means that operators can remove a coating from a workpiece and get it ready for welding or adhesive application with the same disc saving the time of switching abrasives.
Spongy Web, Sharp Mineral
To engineer our Scotch-Brite Clean and Strip XT Pro Extra Cut Disc, aluminium oxide mineral is combined with non-woven nylon fibres using resin. Aluminium oxide is a very hard mineral that delivers a high cut rate, commonly used in high-pressure applications like cutting and weld removal. The resin bond strengthens the fiber web and allows it to gradually break down to reveal new fibres and sharp mineral delivering a consistent cut over the life of the abrasive. The combination of fibre strands, resin and abrasive mineral
Quickly removes heavy rust, thick paint, corrosion and cleans welds
Aluminium oxide mineral aggressively removes top layer and cleans to the bare metal underneath
High conformability provides a larger contact patch for faster removal rates
High-strength fibre resists chunking and performs well on edges
Resists loading for consistent cutting action
Resists loading for consistent cutting action
