Categories
Product Information
ALPHA SILVER SERIES JOBBER DRILL 27/64


Product Specifications
Ordering Code:10055602 
Mfr Code:9LI2764S 
Pack Size:
Unit of Sale:EACH 
Brand:ALPHA 
 
Alpha Silver Series 27/64 inch Jobber Drill Bit
When you go to buy a drill bit, what are you needing? Just a drill? Or do you actually want HOLES ?
DRILL FEATURES
M2 HSS Fully ground M2 HSS material increases drill life
118 Degree Split Point cuts faster and reduces wandering
TECHNICAL DATA
Overall Length 133mm
Flute Length 94mm
Stainless Steel RPM 357
Tool Steel RPM 536
Cast Iron RPM 714
Malleable Iron RPM 804
Medium Carbon Steel RPM 893
Free Cutting Steel RPM 1280
Alum, Brass, Plastic RPM 1815
Wood RPM 2708
Feed per RPM (mm / rev) .25-.35
Standard pack Qty 1
DRILLING PRACTICE
The flute form, web thickness and split point of the standard Alpha drills are suitable for most materials forming fine chips. For effective drilling, the rigidity of the drilland work piece are most important. The shorter the flute length the more rigid the drill. Long drills must be adequately supported to reduce vibration.
The following are important in drill use:
Clamp the work piece securely
Select the correct speed and feed
Use an appropriate coolant or lubricant
Ensure the shank is securely held. Avoid using worn drill chucks as the drill may slip during use.
Regrind the point or replace the drill before it dulls, do not force a worn drill.
When deep hole drilling, withdraw frequently to clear the chips ( deep holes start at 4X the diameter)
For stainless steel, manganese and high tensile steels, do not allow the drill to swell as it will cause work-hardening. Use a slower speed and heavier feed for these materials.
Help Center
Page generated in:
0.72213792800903 seconds