Provides protection against: Particulates (P2), Ozone and Nuisance Level* Acid Gas and Organic Vapours with Low Vapour Pressure.

Protection Factors


Note that any filtering respirator should not be used for protection at airborne concentrations of contaminants above the relevant Immediately Dangerous to Life or Health (IDLH) levels.



This cartridge/filter, when used for protection against the contaminants as specified, is capable of providing the following protection levels:


- With a 3M 6000/7500 Series Half Face Respirator: for particles, for airborne concentrations up to 10 times the Workplace Exposure Standard (WES)

- With a 3M 6000/7800 Series Full Face Respirator: for particles, for airborne concentrations up to 50 x WES

- Organic compounds with low vapour pressures (<1.3Pa @ 25 degrees Celsius) in concentrations up to 10 x WES

- Ozone up to 10 x WES

- Offers relief from acid gases and organic vapours at levels below the WES


Common Applications/Hazards:



*Nuisance Levels are those levels below the Workplace Exposure Standard (WES).



Common Applications/Hazards:



Made from 3M high performance filter media for effective filtration efficiency

Lightweight and provides low breathing resistance

Suitable for use with 3M 6000/7500 Series Half Face Respirators and 3M 6000/7000 Series Full Face Respirators