Kit contains 50 lids with 200 micron filters, 50 liners, and 20 sealing plugs. Graduated measurement to 20.3 oz/600 mL (with mix ratio film insert). Maximum capacity of 25 oz/750 mL when filled to within 1/8 inch of rim. For use with part number 16001.

PPS is a complete painting system from 3M which produces cleaner jobs, saves on solvent usage and gun cleaning time and can improve operator efficiency by as much as 15%. Specifically designed adapters allow painters to use the PPS system with virtually any spray gun.

PPS replaces traditional mixing cups and filters and drastically reduces the amount of solvent required for gun cleaning. The liner, lid and built-in filter are all disposable, leaving only the adapter and spray gun to be cleaned. It is possible to clean your paint gun with as little as 3 ounces of solvent. With these disposable parts, shops can see a 70% savings in cleaning solvent use -- meaning less operator exposure to solvents and reduction in VOCs.

Since PPS uses the same cup for mixing and spraying, there less risk of outside contamination, less time spend mixing and cleaning.

An innovative system that increases quality, reduces solvent usages and increases paint shop productivity

With PPS your spray gun functions at any angle
Many painters mix more paint than they need to reduce the chance of starving the gun. PPS allows painters to spray at any angle without starving the paint gun.

200u filters, ideal for solvent based paints

Reduce cycle times with fast and easy clean up using 3M PPS; often more than 50% time savings. Mix, filter and spray out of a Disposable lid (with pre-welded filter) and Liner.

Efficient use of Materials (less wasted paint, use what you mix)